Peachtree City Roof & Leak
Leak repair

Metal roof leaks

Metal almost never fails in the middle of a panel. It fails at the fasteners, where thermal movement backs screws out and flattens the neoprene washers underneath, and at seams where sealant has gone brittle. A screw standing proud by a couple of millimetres is an open hole, and there may be hundreds of them on a roof. Both failure modes are invisible from the ground and both are straightforward to fix — which is why a leaking metal roof rarely needs replacing.

Call (229) 592-0097

What the job involves

  • Survey of every fastener for backout and washer condition
  • Replacement of failed fasteners with oversized screws where needed
  • Seam and ridge inspection with resealing where sealant has failed
  • Check of penetrations, curbs and any transition to another material
  • Assessment of panel condition and any corrosion at cut edges

Signs you need it

  • Screws standing proud of the panel surface
  • Rust streaks running down from fastener heads
  • A leak that worsens on hot days as panels expand

Where we cover

Each area has its own page for metal roof leaks.

Questions

Do all the fasteners need replacing?

Not always, but they went in on the same day and have had identical weather, so if a number have backed out the rest are on the same trajectory. Doing the whole roof at once usually costs less than returning twice.

My metal roof leaks but there is no visible damage. Why?

That is the normal presentation. Fastener and seam failures are not visible from the ground and often not obvious from the roof either without checking each one. The panel itself is almost never the problem.

Related work

Describe what you are seeing

Most metro Atlanta leaks trace back to a storm that did not look like it caused damage. The shingles are still there, the roof looks fine from the driveway, and water is getting in anyway. Finding where is the job.

Call (229) 592-0097
Call (229) 592-0097